Construction Vehicle Spares

If you are looking for a construction vehicles spares company, you need look no further. Precision Power Parts (P3) is part of the TGS (Tractor & Grader Supplies) Group and is based in Spartan, Johannesburg. P3’s objective is to completely transform the construction industry by offering up-to-the-minute products of the highest quality and standards to any company throughout the world. If you are looking for construction vehicles spares, P3 parts are the best OPM (Original Parts Manufacturers) spares stockists in the aftermarket industry. All of our spare parts meet all OEM quality standards and are backed up with a 1 year or 2000 hour warranty. P3 construction vehicles spares can be used for any CAT type diesel engine. P3 are the leaders in OPM manufactured diesel engine parts and distribute internationally to only the most accredited dealers.

Pistons, piston rings and liners are at the very heart of a diesel engine where combustion takes place and precision in parts is absolutely vital here. Worn rings or liners will usually give a symptom of blue smoke from the exhaust, though this could also be a symptom of valve seating or worn turbocharger seals. These parts are manufactured and tested to a fine tolerance in order to guarantee top engine performance. During manufacture the parts are heat treated for strength and toughness during engine operation. P3 piston rings have a precise fit with the piston grooves giving first-rate oil flow management and sealing between the crankcase and the combustion chamber. The top rings are barrel-faced in order to preserve the correct oil film thickness on the cylinder liner so that liner damage is limited and oil consumption is reduced. The heat-treated piston rings also resist breaking and impact loading.

P3 valves, which seal in the combustion pressure and provide a better-quality compression resistance, are another of the compatible CAT diesel engine parts we stock. The valves are manufactured with extra facing material so that they can be reground and re-used in the future. These parts are made from heat-treated alloy steel so that the stem can bend, thus minimising the risk of cracking or breaking. They are accurately ground with precise welding. Blue smoke is an indication of faulty valves.

P3 Gasket Kits have gaskets that are made from carbon/graphite. They are of exceptionally high tensile strength having a perforated metal core. The gaskets are heat resistant and guarantee reduced creep relaxation.

P3 engine bearings for diesels are manufactured so as to resist abrasion and chafing, to prevent corrosion and to ensure proper clearances and oil flow so that the engine gives maximum performance. Our bearings have reliable wall thickness so that there is always a constant film of oil between the crankshaft journal and the bearing, thus maintaining the correct lubrication between the two parts. A precise Crush Height helps to ensure proper clearance and contact pressure between the bearings and bore.

With a rapidly expanding market share the P3 brand of construction vehicles spares is seeking dealers worldwide so that distribution networks can be put into place in order to take the world by storm. If you are interested in becoming a dealer you will find our contact details in these web pages, and if you have any queries regarding construction vehicles spares please don’t hesitate to contact us.